A design fits a rectangular embroidery field only when both scaled dimensions fit. A 100 × 150 mm design at 120% becomes 120 × 180 mm. It does not fit a 130 × 170 mm field in that orientation, even though its width fits. Those are arithmetic example dimensions, not a specification for a named machine.

Check your design dimensions

Embroidery design field-fit checker

Enter the usable embroidery field in your exact machine/hoop manual. Outer hoop dimensions are not the field.

Example values are loaded. Replace them with your measurements. Your entries stay in this page.

Choosing a machine fills the two field boxes below with the maker's published maximum field. You can still edit them. The full table with a source link for every row is further down this page.

Margin and rotation

Use the calculator to see your result.

Check compatibility before buying a hoop

Pick your machine in the calculator above, or use the exact usable field from your machine manual. A marketing label such as “4 × 4 inches” can be rounded; multiplying it by 25.4 does not prove that the machine supports a 101.6 mm design. Confirm the exact hoop model on the machine maker’s compatibility list before purchasing.

Enter the design’s stitched bounding dimensions from its file information and the supported embroidery field from your exact machine and hoop documentation. This tool does not open, inspect or modify embroidery files.

Use the field, not the outside hoop size

Brother’s larger-frame guidance describes multi-position hoops for its listed 4 × 4-inch machines: more fabric can be held, but the single-design embroidery area remains 4 × 4 inches. A large physical frame therefore does not establish a larger single-design field. That guidance applies to the models listed in the source, not every Brother machine.

For a different example, Brother labels the SA448 with a 6 × 6-inch embroidery field and an explicit list of compatible machines. Confirm both field size and machine support. Do not enter the outer plastic dimensions or assume a hoop with a similar shape is compatible.

If your manual gives inches, multiply by 25.4 to enter millimeters. NIST defines that conversion exactly . If the manual also gives an exact millimeter field, use that stated field rather than a rounded marketing size in inches.

How scale, margins and rotation work

scaled dimension = original dimension × scale percentage / 100

required field width = scaled width + 2 × margin

The same margin is added to the top, bottom, left and right. A 100 × 150 mm design at 100% with 5 mm on each edge needs a 110 × 160 mm rectangle. A zero margin checks only the entered bounds and adds no placement allowance.

The maximum geometric scale is the smaller of the width and height ratios after subtracting both edge margins. For the opening example, with no margin and no rotation, height limits the scale to about 113.3333%. This is a mathematical ceiling, not a recommended resize setting. Rounded output at a boundary does not replace the machine’s final fit check.

Rotation starts off. Enable 90° rotation only when the machine, design and intended placement allow it. The calculator then checks the swapped width and height too. It does not try arbitrary angles, split a design between hoopings or account for nonrectangular fields.

A geometric fit does not verify stitch quality

Brother’s density-preserving resize instructions , specifically for the XV8500D and XV8550D listed there, describe stitch-density recalculation with exceptions and limits. They also call for trial embroidery on the intended fabric and thread. That feature cannot be assumed for other models or software.

Check your own software’s permitted resize range and whether it recalculates stitches. A rectangle can fit while the stitch file, lettering or density still needs attention. Compare the documented machine fields in our embroidery-machine guide and use the stabilizer guide for fabric preparation.

All machines in the database

The picker above is built from this table. It lists the maximum embroidery field for 87 machines from Brother, Baby Lock, Janome, Bernette and Singer. Each row links to the maker’s own page, and a cell is left as “not published” when the page does not say. Brother and Baby Lock publish inches only; Janome, Bernette and Singer publish millimeters. See what the 4x4 and 5x7 labels really hold for how the labels compare, or download the CSV .

Maximum embroidery field for 87 machines, one source link per row. Last checked 2026-11-08.
MachineField as publishedField in mmHoop the maker says comes with itSource
Baby Lock Aerial 8" x 12" about 203.2 x 304.8 (inches x 25.4; maker gives no mm) not published on that page Baby Lock product page
Baby Lock Bloom 5" x 7" about 127 x 177.8 (inches x 25.4; maker gives no mm) not published on that page Baby Lock product page
Baby Lock Capella 7-7/8" x 11-3/4" about 200 x 298.4 (inches x 25.4; maker gives no mm) not published on that page Baby Lock product page
Baby Lock Flare 6.25" x 10.25" about 158.8 x 260.3 (inches x 25.4; maker gives no mm) not published on that page Baby Lock product page
Baby Lock Radiance 11 5/8" x 18 1/4" about 295.3 x 463.5 (inches x 25.4; maker gives no mm) not published on that page Baby Lock product page
Baby Lock Reflection 9.5" x 14" about 241.3 x 355.6 (inches x 25.4; maker gives no mm) not published on that page Baby Lock product page
Baby Lock Ursa 8" x 14" about 203.2 x 355.6 (inches x 25.4; maker gives no mm) not published on that page Baby Lock product page
Baby Lock Venture 2 7 7/8" x 14" about 200 x 355.6 (inches x 25.4; maker gives no mm) not published on that page Baby Lock product page
Baby Lock Vesta 6.25" x 10.25" about 158.8 x 260.3 (inches x 25.4; maker gives no mm) not published on that page Baby Lock product page
Bernette 70 DECO 260x160mm (10.2"x6.3") 260 x 160 Hoop L; Hoop M; Hoop S (sizes not stated on the page) Bernette product page
Bernette 79 260x160mm (10.2"x6.3") 260 x 160 Hoop L; Hoop M; Hoop S (sizes not stated on the page) Bernette product page
Brother BP1400E (listed as discontinued) 6" x 10" Maximum embroidery area about 152.4 x 254 (inches x 25.4; maker gives no mm) not published on that page Brother USA product page
Brother BP3500D (listed as discontinued) 6" x 10" Maximum embroidery area about 152.4 x 254 (inches x 25.4; maker gives no mm) not published on that page Brother USA product page
Brother Innov-ís BX1 14" x 8" about 355.6 x 203.2 (inches x 25.4; maker gives no mm) not published on that page Brother USA product page
Brother Innov-ís BX1e 8"x14" about 203.2 x 355.6 (inches x 25.4; maker gives no mm) not published on that page Brother USA product page
Brother Celeste CX1E 9.5" x 14" about 241.3 x 355.6 (inches x 25.4; maker gives no mm) Embroidery frame set: 36 cm (H) × 24 cm (W) (approx. 14 inches (H) × 9-1/2 inches (W)); Embroidery frame set: 18 cm (H) × 13 cm (W) (approx. 7 inches (H) × 5 inches (W)) Brother USA product page
Brother DZ820E (listed as discontinued) 5" x 7" Embroidery Area about 127 x 177.8 (inches x 25.4; maker gives no mm) not published on that page Brother USA product page
Brother Aveneer EV1 11 5/8” x 18 1/4” about 295.3 x 463.5 (inches x 25.4; maker gives no mm) not published on that page Brother USA product page
Brother HE1 (listed as discontinued) 4" x 4" about 101.6 x 101.6 (inches x 25.4; maker gives no mm) not published on that page Brother USA product page
Brother HE240 (listed as discontinued) 4" x 4" about 101.6 x 101.6 (inches x 25.4; maker gives no mm) not published on that page Brother USA product page
Brother LB5500 4" x 4" about 101.6 x 101.6 (inches x 25.4; maker gives no mm) Embroidery frame set (medium) Brother USA product page
Brother LB6800 (listed as discontinued) 4" x 4" about 101.6 x 101.6 (inches x 25.4; maker gives no mm) not published on that page Brother USA product page
Brother LB7000BNDL 4" x 4" about 101.6 x 101.6 (inches x 25.4; maker gives no mm) included 4" x 4" hoop Brother USA product page
Brother NQ1600E (listed as discontinued) 6" x 10" embroidery area about 152.4 x 254 (inches x 25.4; maker gives no mm) not published on that page Brother USA product page
Brother NQ1700E 6" x 10" about 152.4 x 254 (inches x 25.4; maker gives no mm) not published on that page Brother USA product page
Brother NQ3550W 6" x 10" about 152.4 x 254 (inches x 25.4; maker gives no mm) not published on that page Brother USA product page
Brother NQ3600D (listed as discontinued) 6" x 10" about 152.4 x 254 (inches x 25.4; maker gives no mm) not published on that page Brother USA product page
Brother NQ3700D 6" x 10" about 152.4 x 254 (inches x 25.4; maker gives no mm) not published on that page Brother USA product page
Brother NS1150E (listed as discontinued) 5" x 7" about 127 x 177.8 (inches x 25.4; maker gives no mm) not published on that page Brother USA product page
Brother NS1250E 5" x 7" about 127 x 177.8 (inches x 25.4; maker gives no mm) not published on that page Brother USA product page
Brother NS1750D 4" x 4" about 101.6 x 101.6 (inches x 25.4; maker gives no mm) not published on that page Brother USA product page
Brother NS1850D 4" x 4" about 101.6 x 101.6 (inches x 25.4; maker gives no mm) not published on that page Brother USA product page
Brother NS2750D 5" x 7" about 127 x 177.8 (inches x 25.4; maker gives no mm) not published on that page Brother USA product page
Brother NS2850D 5" x 7" about 127 x 177.8 (inches x 25.4; maker gives no mm) not published on that page Brother USA product page
Brother Innov-ís NV1000 (listed as discontinued) 5" x 7" embroidery area about 127 x 177.8 (inches x 25.4; maker gives no mm) not published on that page Brother USA product page
Brother NV4750D (listed as discontinued) 12" x 7" Embroidery Area about 304.8 x 177.8 (inches x 25.4; maker gives no mm) not published on that page Brother USA product page
Brother PE525 (listed as discontinued) 4" x 4" about 101.6 x 101.6 (inches x 25.4; maker gives no mm) not published on that page Brother USA product page
Brother PE535 (listed as discontinued) 4" x 4" Embroidery Area about 101.6 x 101.6 (inches x 25.4; maker gives no mm) not published on that page Brother USA product page
Brother PE540D (listed as discontinued) 4" x 4" about 101.6 x 101.6 (inches x 25.4; maker gives no mm) not published on that page Brother USA product page
Brother PE545 4" x 4" about 101.6 x 101.6 (inches x 25.4; maker gives no mm) Embroidery frame set (medium) 10 cm (H) × 10 cm (W) (4 inches (H) × 4 inches (W)) Brother USA product page
Brother PE550D (listed as discontinued) 4" x 4" Embroidery Area about 101.6 x 101.6 (inches x 25.4; maker gives no mm) not published on that page Brother USA product page
Brother PE570 4" x 4" about 101.6 x 101.6 (inches x 25.4; maker gives no mm) Embroidery frame set (medium) 10 cm (H) × 10 cm (W) (4 inches (H) × 4 inches (W)) Brother USA product page
Brother PE770 (listed as discontinued) 5" x 7" Embroidery Area about 127 x 177.8 (inches x 25.4; maker gives no mm) not published on that page Brother USA product page
Brother PE780D (listed as discontinued) 5" x 7" Embroidery Area about 127 x 177.8 (inches x 25.4; maker gives no mm) not published on that page Brother USA product page
Brother PE800 (listed as discontinued) 5" x 7" about 127 x 177.8 (inches x 25.4; maker gives no mm) 5" x 7" Embroidery hoop Brother USA product page
Brother PE900 5" x 7" about 127 x 177.8 (inches x 25.4; maker gives no mm) Embroidery frame set (large) Brother USA product page
Brother PR1050X (listed as discontinued) 14" x 8" about 355.6 x 203.2 (inches x 25.4; maker gives no mm) not published on that page Brother USA product page
Brother PR1055X (listed as discontinued) 14" x 8" about 355.6 x 203.2 (inches x 25.4; maker gives no mm) not published on that page Brother USA product page
Brother PR1060W 14" x 8" about 355.6 x 203.2 (inches x 25.4; maker gives no mm) Tubular Frame Table; 8" x 14" Frame; 5" x 7" Frame; 4" x 4" Frame; 1.5" x 2" Frame; Scanning Frame Brother USA product page
Brother Entrepreneur One PR1X 12" x 8" about 304.8 x 203.2 (inches x 25.4; maker gives no mm) Embroidery frame (extra-large) 300 mm (W) × 200 mm (H); Embroidery frame (medium) 100 mm (W) × 100 mm (H); Embroidery Frame Holder A; Embroidery Frame Holder B Brother USA product page
Brother PR670E (listed as discontinued) 12" x 8" about 304.8 x 203.2 (inches x 25.4; maker gives no mm) not published on that page Brother USA product page
Brother PR680W 12" x 8" about 304.8 x 203.2 (inches x 25.4; maker gives no mm) not published on that page Brother USA product page
Brother PRS100 8" x 8" about 203.2 x 203.2 (inches x 25.4; maker gives no mm) not published on that page Brother USA product page
Brother Simplicity SB7500 (listed as discontinued) 4" x 4" about 101.6 x 101.6 (inches x 25.4; maker gives no mm) not published on that page Brother USA product page
Brother SE1800 (listed as discontinued) 5" x 7" about 127 x 177.8 (inches x 25.4; maker gives no mm) not published on that page Brother USA product page
Brother SE1900 (listed as discontinued) 5" x 7" about 127 x 177.8 (inches x 25.4; maker gives no mm) not published on that page Brother USA product page
Brother SE1950 (listed as discontinued) 5" x 7" about 127 x 177.8 (inches x 25.4; maker gives no mm) not published on that page Brother USA product page
Brother SE2000 5" x 7" about 127 x 177.8 (inches x 25.4; maker gives no mm) Embroidery frame set (large) Brother USA product page
Brother SE2100DI (listed as discontinued) 5" x 7" about 127 x 177.8 (inches x 25.4; maker gives no mm) Embroidery frame set (large) Brother USA product page
Brother SE400 4" x 4" about 101.6 x 101.6 (inches x 25.4; maker gives no mm) not published on that page Brother USA product page
Brother SE425 (listed as discontinued) 4" x 4" about 101.6 x 101.6 (inches x 25.4; maker gives no mm) not published on that page Brother USA product page
Brother SE600 (listed as discontinued) 4" x 4" about 101.6 x 101.6 (inches x 25.4; maker gives no mm) included 4" x 4" hoop Brother USA product page
Brother SE625 (listed as discontinued) 4" x 4" about 101.6 x 101.6 (inches x 25.4; maker gives no mm) included 4"x4" hoop Brother USA product page
Brother SE630 4" x 4" about 101.6 x 101.6 (inches x 25.4; maker gives no mm) included 4 in x 4 in hoop Brother USA product page
Brother SE700 4" x 4" about 101.6 x 101.6 (inches x 25.4; maker gives no mm) Embroidery frame set (medium) Brother USA product page
Brother SE725 4" x 4" about 101.6 x 101.6 (inches x 25.4; maker gives no mm) Embroidery frame set (medium) Brother USA product page
Brother VE2200 (listed as discontinued) 7" x 12" about 177.8 x 304.8 (inches x 25.4; maker gives no mm) not published on that page Brother USA product page
Brother VM5100 (listed as discontinued) 7" x 12" about 177.8 x 304.8 (inches x 25.4; maker gives no mm) not published on that page Brother USA product page
Brother Essence VM5200 12" x 8" about 304.8 x 203.2 (inches x 25.4; maker gives no mm) two embroidery frame sets (SA447 and SA438) Brother USA product page
Brother VM6200D (listed as discontinued) 7" x 12" about 177.8 x 304.8 (inches x 25.4; maker gives no mm) not published on that page Brother USA product page
Brother Stellaire Innov-ís XE1 9.5" x 14" about 241.3 x 355.6 (inches x 25.4; maker gives no mm) Embroidery frame with decal set 36 cm (H) × 24 cm (W) (approx. 14 inches (H) × 9-1/2 inches (W)); Embroidery frame with decal set 18 cm (H) × 13 cm (W) (approx. 7 inches (H) × 5 inches (W)) Brother USA product page
Brother Stellaire2 XE2 9.5" x 14" about 241.3 x 355.6 (inches x 25.4; maker gives no mm) Embroidery frame with decal set 36 cm (H) × 24 cm (W) (approx. 14 inches (H) × 9-1/2 inches (W)); Embroidery frame with decal set 18 cm (H) × 13 cm (W) (approx. 7 inches (H) × 5 inches (W)) Brother USA product page
Brother Stellaire XJ1 9.5" x 14" about 241.3 x 355.6 (inches x 25.4; maker gives no mm) Embroidery frame with decal set 36 cm (H) × 24 cm (W) (approx. 14 inches (H) × 9-1/2 inches (W)); Embroidery frame with decal set 24 cm (H) × 24 cm (W) (approx. 9-1/2 inches (H) × 9-1/2 inches (W)); Embroidery frame with decal set 18 cm (H) × 13 cm (W) (approx. 7 inches (H) × 5 inches (W)); Embroidery frame with decal set 10 cm (H) × 10 cm (W) (approx. 4 inches (H) × 4 inches (W)) Brother USA product page
Brother Stellaire2 XJ2 9.5" x 14" about 241.3 x 355.6 (inches x 25.4; maker gives no mm) Embroidery frame with decal set 36 cm (H) × 24 cm (W) (approx. 14 inches (H) × 9-1/2 inches (W)); Embroidery frame with decal set 24 cm (H) × 24 cm (W) (approx. 9-1/2 inches (H) × 9-1/2 inches (W)); Embroidery frame with decal set 18 cm (H) × 13 cm (W) (approx. 7 inches (H) × 5 inches (W)); Embroidery frame with decal set 10 cm (H) × 10 cm (W) (approx. 4 inches (H) × 4 inches (W)) Brother USA product page
Brother Luminaire Innov-ís XP1 (listed as discontinued) 10 5/8" x 16" embroidery area about 269.9 x 406.4 (inches x 25.4; maker gives no mm) 4 Embroidery Frame Sets; ScanImation Scanning Frame Brother USA product page
Brother Luminaire 2 Innov-ís XP2 (listed as discontinued) 10 5/8" x 16" about 269.9 x 406.4 (inches x 25.4; maker gives no mm) not published on that page Brother USA product page
Brother Luminaire 3 Innov-ís XP3 10 5/8" x 16" about 269.9 x 406.4 (inches x 25.4; maker gives no mm) not published on that page Brother USA product page
Brother XV8500D (listed as discontinued) 9.5" x 14" embroidery area about 241.3 x 355.6 (inches x 25.4; maker gives no mm) not published on that page Brother USA product page
Brother XV8550D (listed as discontinued) 9.5" x 14" about 241.3 x 355.6 (inches x 25.4; maker gives no mm) not published on that page Brother USA product page
Janome Continental M17 280mm x 460mm 280 x 460 RE46d 280×460; SQ28d 280×280; RE20d 140×200; SQ10d 100×100 Janome Australia product page (the maker's regional site)
Janome MB-7e 240x200mm 240 x 200 not published on that page Janome Australia product page (the maker's regional site)
Janome Memory Craft 1000 140mm x 140mm 140 x 140 Hoop SQ14e 140x140mm (with template) Janome Australia product page (the maker's regional site)
Janome Memory Craft 500E 280x200mm 280 x 200 Hoop RE28b 280x200mm (with template); Hoop SQ20b 200x200mm (with template) Janome Australia product page (the maker's regional site)
Janome Memory Craft 550E 200 x 360mm 200 x 360 not published on that page Janome Australia product page (the maker's regional site)
Janome Memory Craft 9850 170x200mm 170 x 200 Hoop SQ14a 140x140mm (with template) Janome Australia product page (the maker's regional site)
Janome Skyline S9 170x200mm 170 x 200 not published on that page Janome Australia product page (the maker's regional site)
Singer SE9180 170x100mm 170 x 100 170x100mm Embroidery Hoop Singer product page

Looking for a specific model? See the PE800 and PE900 , the SE600 and SE700 , the SE1900 and SE2000 , the Janome 500E and 550E or Brother’s magnetic hoops .

Method and sources

This is a rectangular geometry check, reviewed October 15, 2026. No machine or sewout was tested. All fit results depend on your entered bounds and manual field; the machine’s own preview and exact instructions remain necessary.

For named examples, Brother publishes these nominal hoop sizes: SA443 4 x 4 in. , SA444 5 x 7 in. , SA448 6 x 6 in. and SA441 6 x 10 in. . Hoops are listed per machine, so check compatibility before you buy.